Simple DIY Car Maintenance Tips You Need to Observe

engine oilToday’s automobiles are no longer just a piece of luxury, but a must tool for convenience. Your car comprises of many different parts and just like any other machine, every part needs to be in a proper working condition.  If one part starts to fail, it can eventually affect all the other parts of your car. When you decide to perform certain car maintenance tasks by yourself, you will save yourself extra expenses that would otherwise end up with a mechanic.

Performing certain regular car maintenance is very important. There are a couple of things you can do to keep your car in an excellent working condition. These may include monitoring car fluids, identifying the needs of your car and identifying any potential risks.

Monitor Car Fluids

Your car is comprised of various fluids that need to be monitoring. To keep these fluids in a top working condition, trust me you don’t need to be an expert. Cars rely on a number of fluids to keep them going. You should perform your own checks between various car inspections. Here are important fluids you need to check;

Engine Oil

The engine of your car needs to be lubricated at all times. If by chance you allow the engine to run out of oil and cause metal parts to rub against each other due to friction. If there is some oil left and appear to be dirty, consider changing it.

Next is the transmission fluid.

Just like engine oil, this fluid helps to keep transmission parts lubricated. When transmission fluid runs low or out, it would result in contaminants forming and this shortens transmission’s life.

Coolant fluid is made up of propylene or ethylene and water. The work of car coolant is to absorb heat and pass it through to the radiator. Coolant may break down over time due to exposure to a hot environment. When coolant runs out, dust may form blocking cooling paths reading to overheating of the engine.

Brake Fluids are another important car fluid.

What happens with brake fluids is that it can absorb moisture from the atmosphere. Because water boils at a lower temperature than the brake fluid itself, it may lead to the formation of air in the brake lines. You should also observe steering fluids to ensure it is in a top condition.

Check the tires and Wheels

There are three important things you need to check in tires and wheels. These are tire pressure, wheel alignment and wheel balancing. Do not underestimate the amount of air pressure required to enable you to move from point A to B. Ensure you have the right amount of tire pressure. When you have high tire pressure, a minimal part of the tires touches the ground.

This may affect the traction and stopping distance of your car. When you have a low tire pressure, it means more area of the tires touches the ground. This may lead to the tires wearing out quickly, leading to excess overheating due to increased friction. Always check the owner’s manual for the right tire pressure your car needs.

 

 

 

 

 

 

 

 

 

 

Factors to Consider When Buying a Used Car

used carAre you planning on buying a used car? The purchase of a used car may be quite hectic as compared to buying a new one. Most people will purchase a used car for obvious reasons that it is much cheaper than a new one. Any person who has a tight family budget understands the need to save cash whenever it is possible. Used cars are not poor quality vehicles as many may assert, but instead cars where their efficiency has been lowered considerably.

Used cars that dealers sale but have hidden damage may eventually become costly to the unsuspecting buyer. To avoid purchasing one that will cause problems for you in the future, here is a checklist of what you need to look at keenly.

 

Car’s Exterior and Interior

Perform a mechanical checklist of the car’s exterior and interior. The condition of both the inside and outside of the vehicle may give you a point to bargain. Ensure you check the interior upholstery carefully to see if any repairs have been done. You need to ensure that the repairs were done professionally and that the results are hardly visible to the users. If any dirty and rusted parts may be a red flag for problems to come in the future.

 

Go for a Test Drive

test driveIt is always advisable you take the car on a test drive on both the highway and local roads. While on the local streets, you will be able to feel how the car responds to turns and twists. You also get a good feel on the condition of the brakes. When you take the car to the highway, you will be able to feel if the engine runs smoothly or not. Ensure you take a keen note on any unusual noises that may come along the way.

 

Review History Report

A review history report may help you see the problems it has faced over the years. Look at issues such as ownership issues, previous accidents and service points. You can get these reports by ordering them online or from dealers. In the process of buying a used car, you should not limit yourself. Consider purchasing a certified pre-owned vehicle as it offers you a certain level of assured quality. Some of the local dealers offer these cars with better warranties that even extend beyond the initial news coverage. Take as much time as you can to avoid buyer’s remorse.